Programming with Recognized Transmitter

 

To match a new transmitter to your vehicle when you have a recognized transmitter, do the following.Two recognized transmitters are required for Canadian owners.

 

1. The vehicle must be off.

2. Have the recognized transmitter and the new, unrecognized transmitter(s) with you.

 

3. Insert the vehicle key into the key lock cylinder located on the outside of the driver’s door.

 

4. Turn the key to the unlock position five times within five seconds.

 

5. The DIC will display READY FOR FOB #X, where X can be 2, 3 or 4.

 

6. Place the new, unrecognized transmitter into the transmitter pocket with the transmitter buttons facing the front of the vehicle. The transmitter pocket is inside the console bin located between the driver and front passenger seat.

 

7. Once the transmitter is programmed, a beep will sound. The DIC will display READY FOR #X, where X can be 3 or 4, or MAX # FOBS LEARNED.

 

8. Remove the transmitter from the transmitter pocket and press the unlock button on the keyless access transmitter two times..